Blinds for windows – Locate the rope with a plastic tab or pellet placed in the upper right part of the blinds. This rope is attached to each horizontal battens and contains a mechanism on top to prevent the rope is fully unwound. Pulling this string causes the strips fully accrue to allow full access to the window. Look at the top left of your blinds. There is a slug of metal, plastic or wood attached to a plastic shaft that rotates 180 degrees horizontal strips. The slug usually measures 10 inches (25.4 cm) long and its color matches your blinds.
Pull the string section on the front of the blinds left to activate the mechanism and strips down to extending down from the windowsill. This cord allows you to raise and lower the blinds as prefer. Always make sure the slats are in an even position. Some blinds require users jalen right to activate the mechanism. You can raise or lower blinds for windows, using the rope regardless of whether the slats are spaced planes or as long as they are in the same position.
Adjusts the horizontal slats in identical positions until they are flat. Make sure each strip is flat, even with all the other strips in the same angle. This allows you to open and close the blinds for windows evenly without bending or mistreat the slats Close blinds turning the dowel for hanging completely closed. This will block all light and not allow their entry through the window.