Front Entry Doors with Sidelights Decor

0

Front entry doors with sidelights – Decorating with side lights to exterior doors prisoners will often catch the attention of visitors when they walk up to home with this distinctive feature. The entry way is the first thing a visitor to your home looks and can set the tone for how they look at the rest of your house. Side lighting is an excellent way to improve the allure and beauty of your home without spending a lot of money. Sidelights can be purchased as part of exterior doors or purchased as a stand-alone unit. Choose from designs, colors and fabrications that blends in, and that will make a great accent to the current facade your entrance way. Choose single or in pairs; half-light or full light. The glass inserts can be private, traditional or colored glass. In general, the standard size is 8 x 36 inches. Some semi-light side lights may be available in smaller sizes. To address concerns about the safety and strength of the door structure on the lock side, a bracing between the door and sidelights or buy a bracing separately. A prop is a form of door reinforcement mechanism that allows you to install the 2 1/2 inch screws through the strike. The stiffening makes the door lock assembly harder to break.

Framing for sidelights, basically, framing an opening for a side light can be compared with the design of the opening for a front entry doors with sidelights. Add seven eighths of an inch to the width and the height of the side light opening to the rough opening dimensions. Mounting a header frame and two side jambs. Leave space between the jamb and the studs to insert shims. Use standard width material 9/16 x 4 3/8 inches. Place the z flashing the sidelights header frame. This will prevent the water penetration.

Install a combination sidelights or door device as you would a door. Separate units are basically installed as a front entry doors with sidelights. Place a thick strip of exterior caulk on the bottom sill before tilting sidelight in place. Shim the bottom corners to keep the unit in place. Place spacers in the upper corner. The frame should fit snug against the side lights. Make sure sidelight is level. Secure sidelight in place and caulk around the perimeter. Read the manufacturer’s instructions for the proper installation of their product, so you do not void the warranty.

Comments are closed.