How to Install Sliding Barn Door Kit

0

Sliding barn door kit – The sliding doors are a great way to access your pole barn. With a little help from your friends, you can add sliding doors to their new barn for easy access. Depending on the mounting kit you buy, its sliding doors should be in place in no time. Purchase a mounting kit to door to door of his barn. Either buy ready-made doors in the correct size or buy materials to make doors.

Place the mounting board in place. It should be slightly longer than the rails of the doors. Firmly nailed to the beams inside the sliding barn door kit. The mounting board has a lot of weight, so make sure it can withstand the door. Follow the manufacturer’s instructions for mounting the door track. Attach any support that come with the track. Use a level to mark a straight line, where the door track should go in the mounting board. Slip on your safety glasses. Use the punch to pre-drill holes in the mounting plate to secure the door track in place. Drill holes and attach the rails of the doors to the mounting plate. Be sure to use all separators and supports that come with the kit.

Mount the doors if you’re doing your own. Place the suspension rollers to the top of the barn doors. Some systems come with a lower guide roller. If this is the case, also attach. Have two friends support the first door on the ground as you climb the ladder. The three of you must work together to guide rollers suspended in the door track. Install the second door in the same way. Make sure the sliding barn door kit operate smoothly. Remember to stop the doors so they do not go off the track each time you use them. Also, install door locks inside.

Leave A Reply