How to Make Wood Bed Frame

0

Wood bed frame mattresses rise to 6 or 8 inches (15.24 or 20.32 cm) off the ground. Is a solid surface and place the two pieces of 6 feet x 9 inches (1.83 x 22.86 cm) at the edge parallel to each other, with a spacing of 5 feet (1.52 m). Complete a rectangle by placing two pieces of 4 feet x 9 inches (1.22 x 22.86 cm) between the other two. Place 3 screws 2 1/2 inches (6.35 cm) through the ends of each of the long and joining the pieces shorter pieces.

Adds support beams inside the frame using two pieces of 2 x 4 (5.08 x 10.16 cm). Place them parallel to the shorter frame parts. Place two screws 2 1/2 inches (6.35 cm) by 6-foot sides x 9 inch (1.83 x 22.86 cm) and joining them with the supporting beams.Place a piece of 3 feet x 4 x 4-inch (0.91 x 10.16 x 10.16 cm) against each of the inner corners of the frame to be the legs of the bed. Place screws 2 1/2 inches (6.35 cm) through the wood bed frame to secure them in place. Repeat of another piece.

Use the remaining two pieces of 3 feet x 4 x 4 inch (0.91 x 10.16 x 10.16 cm) to place the center legs of the wood bed frame. Place a piece of 4 × 4 (10.16 x 10.16 cm) in the center of the beams closer to the outer frame support. Place four screws 2 1/2 inches (6.35 cm) through each support beam to secure. Place a screw 1 1/2 inches (3.81 cm) through plywood along edges and support beams for attaching to the frame. Adds more strength to the legs by placing two 1 1/2 inches (3.81 cm) through the plywood to secure. Your new database is ready for a bed mattress.

Leave A Reply