Torchiere floor lamp – Hampton Bay Torchiere floor lamps have a three-way switch, so that you can choose the right level of lighting for your room. The simplistic design fits with many styles of rooms, and the holder of the lamp can be fitted with an energy-saving bulb as well. Installation is simple and requires no special tools. The first steps you need to spread your lamp parts on a flat surface before beginning to assemble. Inspect every missing, and check for cuts or exposed copper wires. If there is a defect does not continue mounting. You must have four tubes, a small threaded ring, a shade, socket assembly and a base.
The second steps instruction of Torchiere floor lamp is separate four tubes that will make the body of the floor lamp. Each tube will have one end that have threaded on the outside and the opposite end has threaded on the inside. You want to install them outside the wire facing up. Then screw the socket assembly to rotate clockwise into the first tube until tight. Don’t forget to pull the cord from the plug assembly through the opposite end of the tube. Place the three remaining tubes one at a time by turning every clockwise to the previous one. Pull the cord through each tube as you go. Screw the assembled pipe at the bottom until tight. Pull the cord through the bottom of the base.
Now, you need to install shade into the top of the joint socket. It will rest centered at the top. Push the ring supplied with your lamp on top of the joint socket. Turn the ring clockwise until tight. Install bulb assembly base. In order for the lamp to work properly, you need a 3-way type A bulb of no more than 150 watts. Your Torchiere floor lamp was ready to use. If you wanna be have this type of lamp may images on these page can inspired you to choose it. Please enjoyed on this website, believe it you will find many ideas to decorate your home. Would you be agreeing?